---

Free Flooring Calculator

How Much Flooring Do I Need?

Start by calculating the square footage of the floor being covered.

For a rectangular room:

Length × Width = Square Feet

For example, a room measuring 20 feet long by 15 feet wide has an area of:

20 × 15 = 300 square feet

If you're installing flooring in several rooms, calculate each area separately and add them together. You can then choose Enter Total Square Feet in the calculator and enter the combined area.

---

How Much Extra Flooring Should I Order?

Flooring projects normally require more material than the exact measured floor area because installation creates cuts and unusable pieces.

Additional flooring may be needed because of:

• End cuts
• Doorways and closets
• Irregular room shapes
• Angled walls
• Pattern matching
• Board or plank layout
• Damaged pieces
• Future repairs

A 10% waste allowance is a useful starting point for many straightforward flooring estimates, but it is not appropriate for every installation.

Simple rectangular rooms may require less, while diagonal layouts, patterns or complicated spaces may require more. The calculator allows the waste percentage to be adjusted for the project.

---

How Many Boxes of Flooring Do I Need?

Boxed flooring is normally labeled with the number of square feet covered by one full box.

After adding the appropriate waste allowance, divide the total flooring required by the coverage of one box:

Flooring Needed ÷ Square Feet per Box = Boxes Needed

Because flooring is generally purchased by the full box, the calculator rounds the final quantity up to the next whole box.

Use the exact coverage shown on the product packaging. Box coverage varies by manufacturer, flooring type, plank size and product line.

---

Flooring Calculator Formula

The calculator uses four basic steps.

1. Project Area
Length × Width = Square Feet

2. Waste Allowance
Project Area × Waste Percentage = Additional Square Feet

3. Total Flooring Needed
Project Area + Waste = Flooring Needed

4. Boxes to Order
Flooring Needed ÷ Coverage per Box = Boxes Needed

The final box quantity is rounded up so the estimate does not recommend purchasing a partial box.

---

What Types of Flooring Can I Calculate?

This calculator can be used for many flooring products that are sold by the box and list their square-foot coverage.

• Luxury vinyl plank (LVP)
• Luxury vinyl tile (LVT)
• Laminate flooring
• Engineered hardwood
• Prefinished hardwood
• Vinyl flooring
• Other boxed plank or flooring products

For products sold using a different unit of measurement, use the manufacturer's packaging and ordering requirements to determine the appropriate quantity.

---

---

Use Flooring Cost to Build Your Estimate

Material cost is only one part of a flooring job. Contractors may also need to account for labor, demolition, disposal, floor preparation, underlayment, trim, transitions, delivery, equipment, overhead and other direct job costs.

Once you know the flooring material cost, use the Contractor Job Cost Calculator to build the rest of the job cost. Then use the Contractor Markup Calculator or Contractor Profit & Margin Calculator to check your selling price and expected profitability.

---

Frequently Asked Questions

How do I calculate how much flooring I need?

Multiply the length of the room by its width to calculate square footage. Add an appropriate amount for waste, then divide the total square footage required by the coverage provided by each box of flooring.

How much extra flooring should I buy?

Ten percent is a useful estimating starting point for many straightforward installations, but the appropriate waste allowance depends on room shape, product type, layout and installation pattern. Complicated rooms or patterns may require more.

How do I calculate flooring for multiple rooms?

Calculate the square footage of each room or flooring area separately, then add the areas together. Select Enter Total Square Feet in the calculator and enter the combined area.

How many boxes of flooring do I need?

After adding waste, divide the total required square footage by the square-foot coverage of one box. Round the result up to the next whole box.

Where do I find the square feet per box?

The square-foot coverage is normally listed on the flooring packaging or in the manufacturer's product specifications. Use the exact coverage for the product being installed.

Does the flooring calculator include labor?

No. This calculator estimates flooring material quantity and optional material cost. Labor and other job costs should be calculated separately when building the complete project estimate.

---